Key takeaways
- Under-desk CPU mounts lift your tower off the floor and clear legroom. Compare screw-in, clamp-on, and tray designs by width range and load rating.
A desktop tower parked on the floor collects dust, blocks the vacuum, and steals legroom. An under-desk CPU mount solves all three problems at once: it suspends the case beneath the desktop, off the carpet and out of the way of your feet. On a height-adjustable desk, a mounted tower also travels with the desktop, so cords are not stretched every time you switch between sitting and standing.
The designs here fall into three families. Screw-in brackets bolt to the underside of the desktop and carry the most weight. Clamp-on models grip a desk leg or the edge of the desktop, suiting renters and anyone who cannot drill. Tray mounts cradle small form factor machines too low-profile for a clamping frame. The five picks below cover each family, with fit ranges and load ratings as stated on their listings.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most mid-tower office PCs, the PUTORSEN Under Desk PC Mount is the safest starting point thanks to its wide fit range and high stated load rating. If you cannot drill, the VIVO MOUNT-PC01C clamps to a desk leg with tool-free installation, and the TooCust clamp mount grips the desktop edge instead. Small form factor owners should look at the JINGCHENGMEI tray.
WAOCEO CPU Stand Universal PC Case Holder Under Desk
The WAOCEO holder is a hanging bracket that works in two positions: suspended under the desk or fixed to a wall beside it. That flexibility suits offices where the underside of the desktop is crowded with cable trays and power strips but a nearby wall is free. The frame is SPCC cold rolled steel, and the listing gives a maximum load of 30 kilograms, covering the large majority of home and office towers.
Fit is the main homework here. The listing states a height adjustment span of 50 to 530 millimeters and a width range of 135 to 235 millimeters, for cases under 530 millimeters tall. Measure your case at its widest point, including any protruding side panel or feet, and compare before ordering. If your tower fits and you want one bracket that can move from desk to wall, this is a sensible mount to shortlist.
Specs
- Mounting: under-desk hanger or wall side mount
- Material: SPCC cold rolled steel, per the listing
- Maximum load: 30 kilograms, per the listing
- Height adjustment: 50 to 530 millimeters, per the listing
- Width adjustment: 135 to 235 millimeters, per the listing
- Included hardware: confirm on the listing
PUTORSEN Under Desk PC Mount
The PUTORSEN mount is the heavy-duty screw-in option in this roundup. Its listing states support for up to 77 pounds and a width adjustment from 7.9 to 13.4 inches, aimed at mid-tower and mini-tower cases, including wider gaming cases outside the fit window of slimmer brackets. Because the mount fixes directly beneath the desktop, the tower rises and lowers with a standing desk, keeping cable slack consistent at every height.
Installation follows the five steps the listing lays out, from measuring the case to a final adjustment. The trade-offs are common to all screw-in designs. You will drill into the underside of your desktop, so it needs enough thickness and solid material for the screws to bite, and the combined weight of mount and tower counts against a standing desk’s lifting capacity. Within those limits, this is the pick for heavier towers.
Specs
- Mounting: screw-in under-desk mount
- Maximum load: up to 77 pounds, per the listing
- Width adjustment: 7.9 to 13.4 inches, per the listing
- Case fit: mid-tower and mini-tower cases, per the listing
- Included: protective mats, per the listing
- Height adjustment range: confirm on the listing
VIVO Adjustable Clamp-on Desk Leg PC Mount, MOUNT-PC01C
VIVO’s MOUNT-PC01C takes a different approach: instead of fastening to the underside of the desktop, it clamps to the side of a desk leg. The listing describes tool-free installation, so it installs and removes without drilling, a natural fit for renters, hot-desking setups, and anyone who rearranges their office often. The frame is alloy steel, finished in black, and VIVO lists a three year warranty for the model.
Listings describe a fit range of roughly 3.5 to 7.8 inches in case width and 11.5 to 20.5 inches in case height, with a capacity of up to 22 pounds: slim and standard office tower territory, not heavy gaming rig territory. Two checks matter before ordering. First, the clamp needs a desk leg with a flat side it can grip, so measure your leg against the clamp dimensions on the listing. Second, weigh your tower against that 22 pound limit. If both checks pass, this is the least permanent way to get a tower off the floor.
Specs
- Mounting: side clamp on desk leg, tool-free installation
- Model: MOUNT-PC01C
- Material: alloy steel, per the listing
- Case fit: about 3.5 to 7.8 inches wide and 11.5 to 20.5 inches tall, per listings
- Capacity: up to 22 pounds, per listings; warranty terms: confirm on the listing
TooCust Adjustable Clamp Mount on Desk for PC Tower
The TooCust mount clamps onto the edge of the desktop itself rather than the leg, a no-drilling design with more load headroom than most clamp models. The listing states the clamp fits flat desk edges up to 2 inches thick and the thickened steel frame holds up to 50 pounds. Width adjusts from 5.5 to 9.8 inches and height from 13.2 to 21.6 inches, spanning most mid-tower cases used in home offices.
Because the clamp hangs the tower at the side of the desk, think about where your legs and chair arms travel before choosing a position; a side-mounted tower is easy to reach, but it should sit outside your knee space. The clamp also concentrates the load on the desktop edge, so a solid, well-supported edge matters more here than with a screw-in bracket. For a sturdy desk and a mid-weight tower, this design balances capacity, adjustability, and reversibility well.
Specs
- Mounting: clamp on desktop edge, no drilling
- Desk edge fit: flat edges up to 2 inches thick, per the listing
- Maximum load: up to 50 pounds, per the listing
- Width adjustment: 5.5 to 9.8 inches, per the listing
- Height adjustment: 13.2 to 21.6 inches, per the listing
- Finish options: confirm on the listing
JINGCHENGMEI Under Desk Computer Mount for Small Form Factor PCs
Small form factor PCs and game consoles do not sit securely in tower brackets designed for tall cases, which is where this tray-style mount from JINGCHENGMEI fits in. It is a flat under-desk tray sized at 17.3 by 12 inches with a 6.5 inch height, and the listing names small form factor computers along with the PlayStation 4, PS4 Slim, and PS4 Pro as compatible devices. The machine rests horizontally in the tray, as it would on a shelf.
This design suits mini PCs, media PCs, and console setups where the goal is a clear desk surface rather than maximum load capacity. The listing does not headline a weight rating in the material reviewed here, so confirm the load limit on the listing and weigh your machine before ordering, and check the tray depth against your device’s footprint.
Specs
- Mounting: under-desk tray
- Tray size: 17.3 by 12 inches, 6.5 inch height, per the listing
- Compatible devices: small form factor PCs, PlayStation 4, PS4 Slim, PS4 Pro, per the listing
- Model: JC-UND-PCM
- Load rating: confirm on the listing
- Included hardware: confirm on the listing
How to choose an under-desk CPU mount
Start with three measurements: the width of your case at its widest point, its height, and its weight, usually printed in the case or system specifications. Every mount here publishes a fit window and a load rating, and a tower outside either one is a return waiting to happen. Choose a load rating comfortably above your tower’s actual weight, especially on a standing desk that moves the assembly daily.
Next, decide how permanent the installation can be. Screw-in mounts such as the PUTORSEN and WAOCEO carry the most weight, but they need a desktop thick and solid enough to hold screws; thin or hollow-core desktops are a poor match. Clamp-on designs such as the VIVO leg clamp and the TooCust edge clamp avoid holes entirely, with lower capacities. Tray mounts are the specialist option for small form factor machines and consoles.
Finally, check the desk itself. On a height-adjustable desk, add the tower and mount to everything the frame already lifts and stay within the desk maker’s stated capacity. Leave clearance under the desktop at sitting height so the tower does not meet your knees, plan cable lengths for the desk’s highest position, and keep fan intakes and exhausts clear of the frame when you position the mount.
Who should skip an under-desk CPU mount
Skip the mount if your desktop is thin, hollow, or glass, since screw-in brackets need solid material and edge clamps concentrate force in one spot. Skip it if your tower is a full-tower case or a heavy workstation exceeding the load ratings and fit windows listed here; a floor stand or wider heavy-duty bracket is a better route. Laptop and dock users gain nothing from a tower mount, and neither do owners of all-in-one PCs. Desks with a low crossbar, a motor housing, or tight knee clearance may also lack the vertical room a suspended tower needs.
FAQ
Will an under-desk mount work with a standing desk?
Yes, provided the mount is fixed to the desktop or a desk leg so the tower moves with the desk. Add the tower and mount weight to the desk frame’s load, stay within its stated lifting capacity, and route cables with slack for the highest position.
How do I know if my case will fit a mount?
Measure the case width at its widest point, its height, and its weight, then compare all three against the fit window and load rating on the mount’s listing. Measure the case itself, including protruding panels or feet, rather than relying on the nominal case class.
Does mounting a PC under the desk affect cooling?
It can help or hurt depending on placement. A suspended tower sits off the carpet and away from floor dust, but the mount should not block side or top vents, and open space around the case lets air move. Check your case’s vent layout against the mount’s shape before ordering.
Can I install a CPU mount without drilling?
Yes. Clamp-on models such as the VIVO MOUNT-PC01C grip a desk leg, and the TooCust mount clamps to the desktop edge, so both install and remove without holes. The trade-off is a lower load rating and a fit that depends on leg or edge dimensions, so confirm those measurements on the listing first.
Final verdict
An under-desk CPU mount is one of the simplest upgrades in a home office: the tower leaves the floor and legroom opens up. Choose the PUTORSEN for a heavy mid-tower and a permanent install, the WAOCEO when you want the option of wall mounting, the VIVO MOUNT-PC01C or the TooCust when drilling is off the table, and the JINGCHENGMEI tray for a small form factor PC or console. Measure first and match the load rating to your tower.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!