Key takeaways
- Hide desk cords with the best cable raceways. Compare wall channels, under-desk trays and full kits by total length, capacity, mounting and finish.
A clean desk setup falls apart the moment cables spill down the wall or dangle under the desktop. A cable raceway fixes that by giving every cord a covered channel to run through, so the run from monitor to outlet looks like one deliberate line instead of a tangle. The best cable raceways for most desk setups are adhesive wall channels for the vertical drop and a clamp-on tray for the horizontal run under the desk. This guide compares five kits that cover both jobs, from a single-cord channel to a full 315-inch system with corners and connectors included.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Picks
- Delamu Cord Hider 94.5in Cable Raceway
- A+ ELECTRIC Cord Cover Full Kit 315in
- Legrand Wiremold CordMate II Kit CMK10
- Yecaye Cord Hider 113in One-Cord Concealer
- Delamu Under Desk Cable Management Tray
- How to Choose a Cable Raceway
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Picks
- Best overall wall raceway: Delamu Cord Hider 94.5in — a mid-size channel that holds three to four cords and snaps open for changes.
- Best for long runs: A+ ELECTRIC Cord Cover Full Kit — 315 inches of channel with connectors and corners in the box.
- Best single-cord channel: Legrand Wiremold CordMate II Kit — a paintable, brand-name kit sized for one cord.
- Best budget pick: Yecaye Cord Hider 113in — slim one-cord channels for short, simple runs.
- Best under-desk tray: Delamu Under Desk Cable Management Tray — a clamp-on tray that keeps power strips and bricks off the floor.
Delamu Cord Hider 94.5in Cable Raceway
The Delamu Cord Hider is the straightforward answer for the most common desk problem: two to four cords running from a monitor or desktop down the wall to an outlet. The kit splits 94.5 inches of channel into six equal sections, each 1.18 inches wide and 0.67 inches high, which is enough internal room for a monitor power lead, a display cable and a charging cable side by side. The cover snaps on and off, so adding or removing a cord later does not mean peeling the whole run off the wall.
Installation uses the included adhesive tape, and the sections join with couplings so the line stays straight across seams. The grey finish suits darker walls and gaming setups better than the usual white, and the PVC body can be cut to length with a fine saw for runs that end mid-wall. For a single desk against a wall, this kit covers the full vertical drop plus a short horizontal stretch in one box, which is why it leads this list as the mid-range all-rounder.
Specs
- Total length: 94.5 inches across 6 sections
- Channel size: 1.18 inches wide by 0.67 inches high per section
- Capacity: 3 to 4 cords per channel
- Material: PVC with snap-on cover
- Mounting: self-adhesive tape, cut to fit
- Color: grey
- Model: CC02
A+ ELECTRIC Cord Cover Full Kit 315in
When one desk grows into a full battlestation, or the outlet sits across the room, total length becomes the deciding factor. The A+ ELECTRIC Full Kit supplies 315 inches of raceway, roughly 26 feet, in 20 snap-on channels, and it includes the connectors and corner pieces that smaller kits leave out. Inside and outside corners matter more than they sound: without them, a run that turns along a baseboard ends in exposed gaps or awkward mitred cuts.
The channel profile is sized for TV, HDMI and speaker cables as well as desk cords, so it handles a mixed run of power and signal cables without bulging the cover. The white surface is paintable, which lets the channel disappear against a painted wall once the setup is final. Adhesive mounting keeps the install reversible, a real advantage in rented rooms. This is the premium-tier choice for long, multi-turn runs where buying two small kits would cost more fittings and more seams.
Specs
- Total length: 315 inches (about 26 feet) across 20 channels
- Cover style: snap-on, self-adhesive backing
- Included fittings: connectors and corner pieces
- Finish: white, paintable
- Intended cables: power cords, HDMI, speaker and desk cables
- Material: plastic channel with removable cover
- Model: FULL-KIT-CORD-HIDER
Legrand Wiremold CordMate II Kit CMK10
Legrand’s Wiremold line is the name electricians reach for, and the CordMate II kit is its desk-friendly version. The kit includes 12 feet of channel in four 30-inch sections, plus a full set of fittings: one outside elbow, one inside elbow, two flat elbows and three couplings. That fitting count is generous for a kit this size and means a run can drop down a wall, turn along a baseboard and finish at an outlet without extra purchases.
The channel is sized for a single cord, which suits a floor lamp lead, one Ethernet run to a desk, or a lone monitor power cable. The white finish is paintable and the profile is low and rounded, so it reads as trim rather than hardware. Because it comes from an established electrical brand, the plastic and adhesive feel a step above no-name kits. Choose it when the job is one cord done neatly, not a bundle.
Specs
- Total length: 12 feet across 4 sections of 30 inches
- Capacity: 1 cord per channel
- Included fittings: 1 outside elbow, 1 inside elbow, 2 flat elbows, 3 couplings
- Finish: white, paintable
- Mounting: self-adhesive
- Brand line: Wiremold by Legrand
- Model: CMK10
Yecaye Cord Hider 113in One-Cord Concealer
The Yecaye 113in kit is the budget-tier way to erase a single visible cord. Eight slim channels add up to 113 inches of coverage, and each channel measures just 0.59 inches wide by 0.4 inches high, so the finished run is barely wider than the cord inside it. The listing rates it for one cord or two small wires, which fits a USB-C charging lead, a speaker wire or a thin Ethernet cable.
The PVC channels are paintable and cut easily, and the adhesive backing makes this a tool-free install that suits dorms and rentals. The trade-off for the slim profile is capacity: thick power bricks and bundled cables will not fit, so measure your cord before ordering. For a single drop from a wall-mounted monitor or a short run to a desk lamp, it is the least visible and least expensive route on this list.
Specs
- Total length: 113 inches across 8 channels
- Channel size: 0.59 inches wide by 0.4 inches high
- Capacity: 1 cord or 2 small wires per channel
- Material: PVC, paintable and cut to fit
- Mounting: self-adhesive, no tools required
- Color: white
- Model: CMC03
Delamu Under Desk Cable Management Tray
Wall channels handle the drop, but the mess under most desks is horizontal: a power strip, two laptop bricks and a nest of cables resting on the floor. The Delamu Under Desk Tray attacks that half of the problem. Each tray is 31.5 inches long, and the two-pack gives over five feet of covered storage that clamps to the desk edge or underside with no drilling, so it works on standing desks and rented furniture alike.
The hard plastic body is rigid enough to hold a loaded power strip without sagging, and the open design lets cables enter and exit along the run while staying hidden from seated eye level. Because the tray moves with a height-adjustable desk, cords keep their slack organized through the full range of motion. Pair it with any wall raceway above for a complete floor-to-monitor cleanup. This is the mid-range pick for under-desk duty.
Specs
- Length: 31.5 inches per tray, 2 trays per pack
- Material: hard plastic
- Mounting: clamp-on, no drilling required
- Color: black
- Designed for: power strips, adapters and cable bundles under desks
- Compatibility: fixed and standing desks
- Brand: Delamu
How to Choose a Cable Raceway
Measure the run first. Add up the vertical drop and every horizontal stretch, then buy at least a foot more channel than the measurement. Kits are sold by total inches, and a run that turns corners consumes length faster than expected.
Match capacity to your thickest cord. Slim one-cord channels around 0.6 inches wide suit single leads. Bundles of three or four cords need a channel at least 1.18 inches wide and 0.6 inches high, or the cover will bow and pop open.
Count your corners. A straight drop needs no fittings. Every turn along a wall or baseboard needs an elbow, so kits that include inside and outside corners save a second order. Flat elbows handle turns on the same wall surface; inside and outside elbows handle wall corners.
Pick a mounting style you can live with. Adhesive raceways install in minutes and remove cleanly from most painted walls, which suits renters. They can struggle on textured or dusty surfaces, where screw-mounted channels hold better. Under the desk, clamp-on trays avoid both adhesive and screws.
Plan for changes. Snap-on covers let you add a cable later without removing the channel. One-piece slit designs are cheaper but mean re-threading the whole run. If your setup changes often, the snap-on style is worth it.
Finish matters. Paintable white PVC disappears on light walls. Grey or black channels suit darker rooms and gaming setups. A raceway is visible by design, so treat it like trim and match it to the wall.
FAQ
Can a cable raceway hold a power strip?
No. Raceways are channels for individual cords, not enclosures for power strips. Keep the strip in an under-desk tray or cable management box, then run its single power cord through the raceway to the outlet. That combination keeps both the strip and the run hidden.
Will adhesive raceways damage painted walls?
Adhesive kits are designed for smooth painted drywall and usually remove with slow, steady pressure. Damage risk rises on old paint, wallpaper and textured surfaces. On delicate finishes, choose a screw-mounted channel or a clamp-on under-desk tray instead, and never mount adhesive raceway over radiators or heat sources.
How many cables fit in one raceway channel?
It depends on channel size and cable thickness. A slim 0.59-inch channel fits one standard cord or two thin wires. A 1.18-inch channel typically fits three to four mixed desk cables, such as a power lead, a display cable and a USB cable. Leave a little slack in the channel so the cover closes flat.
Can I cut a cable raceway to size?
Yes. PVC raceways cut cleanly with a fine-tooth saw or heavy scissors, and most kits expect trimming for exact fits. Cut the base and cover separately, sand any rough edge, and place couplings over seams so the finished run looks continuous.
Conclusion
A tidy desk setup is mostly a cable routing problem, and a raceway solves it for good. For most desks, the Delamu 94.5in Cord Hider covers the wall drop with room for three or four cords. Long or corner-heavy runs call for the A+ ELECTRIC 315in Full Kit, while the Legrand Wiremold CordMate II and the Yecaye 113in kit each hide a single cord at premium and budget tiers respectively. Finish the job under the desk with the Delamu tray, and every cord in the setup has a covered home.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!