Key takeaways
- Find the best monitor wall mounts for your desk, from budget arms to a premium ultrawide pick, with VESA sizes, load limits, tilt and swivel compared.
The best monitor wall mount for most single-screen desks is the WALI 1330LM: it fits 13 to 32 inch monitors, holds up to 33 pounds, and gives full tilt, swivel and rotation on an arm that folds back to two inches from the wall. If you want fingertip height adjustment, the ErGear EGWSS1 and the Mount-It! MI-765 add gas spring arms. For an ultrawide screen, the VIVO MOUNT-VW01M carries displays up to 49 inches and 44 pounds, while the VideoSecu ML12B is a simple steel arm rated for 44 pounds at a budget tier.
Moving a monitor off the desk and onto the wall frees the full footprint of the stand and lets you set the screen at eye level. The five mounts below cover the main formats: a low-cost articulating arm, two gas spring arms for frequent repositioning, a heavy-duty steel bracket, and a wide-screen model built for ultrawide panels. Every pick uses the common VESA 75x75mm or 100x100mm patterns, so compatibility comes down to your screen size, its weight without the stand, and the wall you plan to drill into.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose a Monitor Wall Mount
- WALI 1330LM Articulating Monitor Wall Mount
- ErGear EGWSS1 Gas Spring Monitor Wall Mount
- Mount-It! MI-765 Gas Spring Monitor Wall Mount
- VideoSecu ML12B Full Motion Monitor Wall Mount
- VIVO MOUNT-VW01M Ultrawide Monitor Wall Mount
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Monitor Wall Mount
Check the VESA pattern first. Nearly every monitor in the 13 to 34 inch range uses four screw holes on the back panel, spaced either 75x75mm or 100x100mm apart. All five mounts in this guide cover both patterns. Measure the distance between the holes on your monitor, or look for the VESA size in its manual, before you order. A monitor with no VESA holes needs an adapter bracket, which none of these mounts include.
Weigh the monitor without its stand. A mount only carries the panel itself, so use the weight listed for the display without its desktop stand. Stay comfortably under the rated limit rather than right at it: a gas spring arm near the top of its range can drift, and an arm near its limit leaves no margin for the force applied when you pull the screen toward you.
Match the mount to your wall. Every mount in this guide must anchor into a wood stud, solid concrete or brick. None may be fixed to drywall alone, because the leverage of an extended arm can pull ordinary drywall anchors out of the panel. If no stud sits where you need one, a desk clamp arm is the safer format.
Decide how much motion you need. A basic articulating arm tilts, swivels and extends, and you set its height once during installation by choosing where the wall plate goes. A gas spring arm adds true height adjustment after installation: the counterbalanced arm floats the screen up or down and holds the position you leave it in. Gas spring models suit shared desks and anyone who changes position through the day; a standard arm suits a single user whose seating position rarely changes.
WALI 1330LM Articulating Monitor Wall Mount
The WALI 1330LM is the straightforward pick for a single monitor in the 13 to 32 inch range. Its steel arm extends up to 15 inches from the wall and compresses back to two inches, so the screen can sit nearly flat or pull forward over a deep desk. The mount supports up to 33 pounds, which covers most monitors in this size class with room to spare.
Adjustment covers the full range most people use. The plate tilts 15 degrees up or down, the arm swivels 180 degrees at the wall plate and the VESA plate rotates a full 360 degrees, so switching between landscape and portrait takes a turn of the screen rather than any tools. That portrait rotation is handy for long documents, coding, or a vertical second screen.
Installation follows the usual pattern for this format: fix the wall plate to a wood stud, concrete or brick wall, attach the VESA plate to the monitor, then hang the monitor on the arm. WALI includes the mounting hardware kit and a manual in the box. There is no gas spring and no cable channel, so height is set by the wall plate position and cables hang free unless you add your own clips. For a fixed workstation, those omissions keep the design simple and the tier low.
Specs
- Screen size: 13 to 32 inches
- Weight capacity: up to 33 lbs (15 kg)
- VESA patterns: 75x75mm, 100x100mm
- Tilt: plus 15 degrees to minus 15 degrees
- Swivel: 180 degrees at the wall plate, 360 degrees at the VESA plate
- Rotation: 360 degrees
- Extension from wall: 2 inches retracted to 15 inches extended
- Material: steel
- Wall types: wood stud, solid concrete or brick
ErGear EGWSS1 Gas Spring Monitor Wall Mount
The ErGear EGWSS1 suits monitors that get repositioned often. Its gas spring arm counterbalances screens weighing from 4.4 to 17.6 pounds, so a 13 to 32 inch flat or curved monitor can be raised, lowered and pulled forward with light pressure, then left floating at the height you chose. The arm reaches up to 18.3 inches from the wall and provides about 11 inches of height travel.
The joint ranges are generous. Tilt runs from plus 45 degrees to minus 45 degrees, the arm swivels 90 degrees to each side, and the plate rotates 360 degrees for portrait use. That combination works well where the screen needs to angle toward a chair that is not directly in front of the mount, and in small rooms where one screen serves a desk and a nearby seat.
ErGear builds the arm from alloy steel and rates it for wood stud, concrete and brick walls. One setup point matters with any gas spring: set the spring tension with the monitor already mounted, following the manual, so the arm neither sinks nor lifts on its own. Screens lighter than 4.4 pounds sit below the counterbalance range and may not stay down, so very light portable monitors are a poor match. Within its weight band, this is the most flexible standard-size mount here.
Specs
- Screen size: 13 to 32 inches, flat or curved
- Weight capacity: 4.4 to 17.6 lbs
- VESA patterns: 75x75mm, 100x100mm
- Tilt: plus 45 degrees to minus 45 degrees
- Swivel: plus 90 degrees to minus 90 degrees
- Rotation: 360 degrees
- Extension from wall: up to 18.3 inches
- Height adjustment: about 11 inches of travel
- Material: alloy steel
- Arm type: gas spring, counterbalanced
Mount-It! MI-765 Gas Spring Monitor Wall Mount
The Mount-It! MI-765 is a compact gas spring arm for lighter monitors. It fits 13 to 32 inch screens up to 14.3 pounds, which covers most office and gaming monitors in the 24 to 27 inch classes once their stands come off. The arm extends up to 17.1 inches and offers up to 9.85 inches of height adjustment, so the screen can move between seated and standing positions.
Its tilt range is the widest in this guide, running from plus 90 degrees to minus 45 degrees. That upward range helps when the mount sits low, for example above a counter or in a camper or RV, and Mount-It! markets this model for vehicle installations as well as home offices. Swivel covers 180 degrees and the plate rotates 360 degrees.
Cable management clips are built into the arm, and the box includes the hardware for a single wood stud, concrete or brick installation. The trade-off for the slim arm is the 14.3 pound ceiling: weigh your panel without its stand before choosing this model, because heavier 32 inch monitors can exceed it. For a light or midweight screen that moves several times a day, the MI-765 gives smooth one-hand adjustment from a small wall footprint.
Specs
- Screen size: 13 to 32 inches
- Weight capacity: up to 14.3 lbs (6.5 kg)
- VESA patterns: 75x75mm, 100x100mm
- Tilt: plus 90 degrees to minus 45 degrees
- Swivel: 180 degrees
- Rotation: 360 degrees
- Extension from wall: up to 17.1 inches
- Height adjustment: up to 9.85 inches
- Arm type: gas spring, counterbalanced
- Extras: integrated cable management, mounting hardware included
VideoSecu ML12B Full Motion Monitor Wall Mount
The VideoSecu ML12B is a long-running steel design built around strength rather than features. It is rated for screens from 19 to 31 inches and up to 44 pounds, which makes it a sensible choice for older, heavier LCD monitors and small televisions that would overload a light arm.
The single arm runs about 15 inches and swivels 180 degrees at the wall plate, with 360 degrees of movement at the arm joints and the TV plate. The VESA plate detaches from the arm, so you can bolt the plate to the back of the screen on a table and then hang the assembly on the mounted arm, an easier sequence than holding the monitor in place while you work.
There is no gas spring, no height travel after installation, and no cable management, and the black steel frame looks plain next to the newer arms in this guide. What you get instead is a simple, rigid bracket with few moving parts to wear. VideoSecu supplies a mounting hardware kit with screws, anchors and a small spanner in the box; you provide a drill and a screwdriver. For a heavy screen that will sit in one position, this remains a sound budget-tier option.
Specs
- Screen size: most 19 to 31 inches
- Weight capacity: up to 44 lbs (20 kg)
- VESA patterns: 75x75mm, 100x100mm
- Swivel: 180 degrees at the wall plate, 360 degrees at the arm joints and plate
- Arm length: about 15 inches
- VESA plate: detachable
- Material: steel
- Wall types: wood stud, solid concrete or brick
- Extras: mounting hardware kit and spanner included
VIVO MOUNT-VW01M Ultrawide Monitor Wall Mount
The VIVO MOUNT-VW01M is the pick for large and ultrawide monitors. It supports screens up to 49 inches and up to 44 pounds on the standard 75x75mm and 100x100mm VESA patterns, which covers the current generation of 34, 38 and 49 inch ultrawide panels. The high-grade steel arm collapses flat against the wall for a low profile and extends up to 10.5 inches when you need the screen closer.
Motion is more restrained than on the smaller arms, as expected at this size and weight. Tilt runs from plus 5 degrees to minus 12 degrees, swivel from plus 45 degrees to minus 45 degrees, and a leveling adjustment of plus or minus 3 degrees lets you square the screen after installation without remounting the plate. Integrated cable management routes the cords along the arm for a cleaner wall.
Two fit notes apply to this class of monitor. Some Samsung ultrawide models need a separate VESA adapter from the monitor maker before any 100x100mm mount can attach, so confirm the back panel of your screen before ordering. The wall fixing also carries more load than a standard mount, so anchor into a stud or masonry as directed and check the combined weight of panel and adapter against the 44 pound limit. For a big screen that mostly stays in one place, this is the premium-tier option here.
Specs
- Screen size: up to 49 inches, including ultrawide panels
- Weight capacity: up to 44 lbs
- VESA patterns: 75x75mm, 100x100mm
- Tilt: plus 5 degrees to minus 12 degrees
- Swivel: plus 45 degrees to minus 45 degrees
- Leveling: plus 3 degrees to minus 3 degrees
- Extension from wall: up to 10.5 inches, collapses flat when retracted
- Material: alloy steel
- Extras: integrated cable management
Frequently Asked Questions
Can any monitor be wall mounted?
Most monitors with a VESA mounting pattern can. Look for four screw holes in a square on the back panel, spaced 75x75mm or 100x100mm apart for the mounts in this guide. Some slim monitors, all-in-one PCs and portable USB screens have no VESA holes; those need a model-specific adapter or a tray-style holder instead.
What VESA pattern does my monitor use?
Measure the horizontal and vertical distance between the centers of the four holes on the back of the monitor. A spacing of 75mm or 100mm covers nearly every monitor up to 34 inches and most ultrawide panels. The figure also appears in the monitor manual and on the maker spec sheet. Match that pattern, plus the screen weight without its stand, against the mount limits.
Can a monitor wall mount be installed on drywall alone?
No. Every mount in this guide must anchor into a wood stud, solid concrete or brick. An extended arm acts as a lever, and drywall anchors can pull out under that load, dropping the screen. Use a stud finder to locate framing, or choose a desk clamp arm if your wall position has no stud behind it.
Is a gas spring arm better than a standard articulating arm?
It depends on how often the screen moves. A gas spring arm, like the ErGear EGWSS1 or the Mount-It! MI-765, adds height adjustment after installation and repositions with one hand, which suits shared desks and sit-stand setups. A standard arm, like the WALI 1330LM or the VideoSecu ML12B, sets its height once during installation and costs less at the same screen size. If your seating position never changes, the simpler arm does the same job.
Conclusion
For most people mounting one ordinary monitor, the WALI 1330LM covers the essentials: 13 to 32 inch screens, 33 pounds of capacity, full tilt, swivel and portrait rotation, and a profile that folds back to two inches. Choose the ErGear EGWSS1 or the Mount-It! MI-765 if you want gas spring height adjustment, keeping an eye on their lower weight limits. The VideoSecu ML12B remains the heavy-duty budget option for older, heavier panels, and the VIVO MOUNT-VW01M is the one to buy for an ultrawide up to 49 inches. Whichever arm you pick, confirm the VESA pattern, weigh the panel without its stand, and anchor into a stud or masonry.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!