Key takeaways
- Compare the best monitor stands with storage drawers, from bamboo risers to dual monitor shelves, with drawer layouts, sizes and load ratings explained.
A monitor stand with storage drawers lifts your screen to a better viewing height and gives the small items that usually scatter across a desk — pens, sticky notes, cables, drives, glasses — a closed home right under the display. The best overall pick for most desks is the OPNICE Computer Monitor Stand Riser with 2 Drawers, an all-metal two-tier riser with two drawers and two pen holders in a compact footprint. The best budget pick is the wide gianotter Dual Monitor Stand Riser, and the best premium pick is the ROCDEER Bamboo Monitor Stand Riser with Drawer, which pairs FSC-certified bamboo with a drawer, a lower shelf, and a rear cable slot.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Picks
- OPNICE Computer Monitor Stand Riser with 2 Drawers
- ROCDEER Bamboo Monitor Stand Riser with Drawer
- gianotter Dual Monitor Stand Riser with Drawer
- Simple Houseware Metal Monitor Stand Riser with Organizer Drawer
- meatanty Monitor Stand with USB Hub and Drawer Storage
- How to Choose a Monitor Stand With Storage Drawers
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Picks
- Best overall: OPNICE Computer Monitor Stand Riser with 2 Drawers & 2 Pen Holders — two drawers, two pen holders, and an all-metal two-tier frame in a 14.1-inch width that suits single-monitor desks.
- Best premium: ROCDEER Bamboo Monitor Stand Riser with Drawer — FSC-certified bamboo, a sliding drawer, a lower storage tier, and a T-shaped cable management slot at the back.
- Best budget: gianotter Dual Monitor Stand Riser — a 40.6-inch metal shelf that spans two monitors, with a drawer and two pen holders along the front.
- Best open mesh design: Simple Houseware Metal Monitor Stand Riser with Organizer Drawer — a ventilated metal platform with a pull-out drawer and side accessory holders.
- Best with charging: meatanty Monitor Stand — adjustable height legs, four USB ports, a phone charging pad area, and drawer storage in a 21-inch metal riser.
OPNICE Computer Monitor Stand Riser with 2 Drawers
The OPNICE two-drawer riser is the most storage-dense option in this roundup relative to its footprint. The stand measures 14.1 x 9.1 x 5.6 inches, so it fits desks where a wide dual-monitor shelf would crowd out everything else, and the two-tier layout stacks a monitor platform on top of a storage level below. Two drawers sit side by side under the platform, which makes it easy to separate categories — charging cables and adapters in one drawer, pens and sticky notes in the other.
OPNICE builds the frame, the drawers, and the pen holders from metal rather than plastic, and the listing describes the construction as rust resistant and scratch resistant. Two hanging pen holders mount at the sides, keeping the pens you reach for most often outside the drawers entirely. The 5.6-inch overall height is at the taller end of this group, which suits shorter monitors that need a noticeable lift. Because the width is modest, this is a single-monitor or laptop stand rather than a two-screen shelf; buyers with two displays should look at the gianotter below. As a mid-range option, it offers the strongest drawer count per inch of desk width in this list.
Specs
- Dimensions: 14.1 x 9.1 x 5.6 inches
- Material: all-metal frame, drawers, and pen holders
- Storage: 2 drawers plus 2 hanging pen holders
- Layout: two-tier design with an open lower level
- Finish: black; other color options listed by the seller
- Model: OP-CMS-Black family
ROCDEER Bamboo Monitor Stand Riser with Drawer
The ROCDEER riser is the natural-material option in this roundup. It is built from FSC-certified bamboo with a water-based varnish, and it measures 23.63 x 7.88 x 4.53 inches — wide enough for a single 24- to 32-inch monitor, including curved displays, according to the maker. Storage comes in two forms: a sliding drawer for small items you want hidden, and an open lower tier that can hold a notebook, a tablet, or a keyboard up to 18 inches wide when the desk needs clearing.
A T-shaped slot at the back routes cables down and away, which keeps the rear of the desk tidier than a plain shelf does. ROCDEER publishes a load rating of 22 pounds for this drawer model, so it is worth checking the weight of a large monitor with its stand before ordering; many 27-inch displays fall under that figure, but heavier panels may not. The 4.53-inch height gives a moderate lift that works well when the screen sits only slightly too low.
Specs
- Dimensions: 23.63 x 7.88 x 4.53 inches
- Material: FSC-certified bamboo with water-based varnish
- Storage: 1 sliding drawer plus an open lower tier
- Load rating: 22 lb as published by the maker
- Monitor fit: most 24- to 32-inch monitors, including curved models
- Extras: T-shaped rear cable management slot; keyboard space up to 18 inches wide underneath
gianotter Dual Monitor Stand Riser with Drawer
The gianotter dual riser stretches 40.6 inches across the desk, which is enough platform for two monitors side by side or one ultrawide display with room to spare at the edges. It stands 4.3 inches tall and 9.3 inches deep. A drawer runs along the front of the stand, and two pen holders mount at the sides, so the storage stays reachable even though the platform itself is wide. The open space underneath the shelf can swallow a keyboard when you want the desk surface clear for writing or paperwork.
The stand is metal, arrives in black with several other color options in the same listing family, and the maker lists it as requiring no assembly — the shelf is a single piece rather than a kit of panels and legs. That fixed design is also the main trade-off: the height is not adjustable, so the 4.3-inch lift has to suit your chair and desk combination as it is. Load capacity is not stated in the listing data, so very heavy monitor pairs are better matched to a stand with a published rating.
Specs
- Dimensions: 40.6 x 9.3 x 4.3 inches
- Material: metal
- Storage: 1 front drawer plus 2 pen holders
- Monitor fit: dual monitors or a single ultrawide display
- Assembly: none required, per the listing
- Model: D1-2B
Simple Houseware Metal Monitor Stand Riser with Organizer Drawer
Simple Houseware’s metal riser takes a different approach: a ventilated metal platform with a pull-out organizer drawer beneath it and accessory holders at the sides. The stand measures 20.24 x 11.5 x 5.79 inches, making it the deepest option in this roundup, and that depth is useful if your monitor has a large stand base. The mesh-style top also lets air move under a laptop, so the stand doubles as a laptop riser.
The drawer pulls out from the front and is sized for the usual small-item mix — pens, sticky notes, paper clips, cables — while the side holders keep a phone and writing tools upright and visible. At 5.79 inches, it is the tallest stand here, which can help with monitors that sit low on short factory stands, but it can overshoot on desks that are already high relative to the chair. The design has been sold for years under the same model number, DO-009-1, which makes matching a second unit for a two-desk office straightforward.
Specs
- Dimensions: 20.24 x 11.5 x 5.79 inches
- Material: metal with a ventilated platform
- Storage: 1 pull-out organizer drawer plus side accessory holders
- Model: DO-009-1
- Use: monitor, laptop, or printer riser
- Finish: black
meatanty Monitor Stand with USB Hub and Drawer Storage
The meatanty stand adds powered features that the other picks leave out. Alongside its drawer storage, the 21 x 7.8 x 4.2-inch metal riser carries four USB ports on the front edge and a phone charging area, so a phone, a headset dongle, and a flash drive can all plug in at the shelf instead of trailing cables to the back of a computer tower. The legs adjust, letting you set the platform at more than one height rather than accepting a single fixed lift.
That combination makes this the pick for desks where cable clutter, not just loose objects, is the problem: the drawer hides the items you rarely touch, and the hub keeps the items you plug in daily within reach. The 7.8-inch depth is the shallowest here, which helps on narrow desks but leaves less room for oversized monitor bases. Because the stand includes electronics, it needs a power connection for the hub and charging features to work; used unpowered, it behaves like a plain riser with a drawer.
Specs
- Dimensions: 21 x 7.8 x 4.2 inches
- Material: metal
- Storage: drawer storage under the platform
- Ports: 4 USB ports on the front edge
- Extras: phone charging area; height-adjustable legs
- Use: monitor, laptop, and studio display setups
How to Choose a Monitor Stand With Storage Drawers
Start with width. Measure the footprint of your monitor’s stand base, then decide whether the riser needs to hold one screen or two. Single-monitor stands in this roundup run from about 14 to 24 inches wide, while dual-monitor shelves stretch past 40 inches. A stand that is much wider than the display wastes desk depth at the sides; one that is narrower than the monitor base will not work at all.
Next, match the height to your setup. Most drawer risers lift a screen between about 4.3 and 5.8 inches. If your monitor already has a height-adjustable stand, a shorter riser plus the monitor’s own adjustment gives the widest range. If the display sits on a fixed short stand, a taller riser does more of the work. Adjustable-leg models like the meatanty are the flexible middle ground.
Then think about what the storage actually needs to hold. Shallow drawers suit pens, sticky notes, drives, and cables, but they will not fit a thick notebook or a full-size headset. Two drawers make it easier to separate work items from charging gear. An open lower tier, like the ROCDEER’s, is better for a keyboard or a tablet that you slide in and out many times a day.
Material sets both the look and the published load rating. Bamboo reads as furniture and suits visible home offices, but check the maker’s stated capacity — the ROCDEER drawer model is rated at 22 pounds. Metal stands are thinner for the same footprint and often add ventilation for laptops. Finally, look at the back: a cable slot keeps cords from being pinched between the stand and the wall.
FAQ
How much height does a monitor stand with drawers add?
Most models in this category add roughly 4 to 6 inches. The stands compared here range from 4.2 inches for the meatanty to 5.79 inches for the Simple Houseware metal riser. The right figure depends on your desk height, chair height, and whether the monitor’s own stand adjusts; the goal is a screen position where the top of the display sits near eye level.
Will a drawer riser fit a keyboard underneath?
Some will. The ROCDEER lists open space under its lower tier for keyboards up to 18 inches wide, and the wide gianotter shelf leaves open room beneath the platform. Stands with two drawers, like the OPNICE, fill that under-platform space with storage instead, so a keyboard has to stay on the desk. Check the internal clearance height as well as the width before counting on it.
Can these stands hold a laptop or a printer instead of a monitor?
Yes, within the published load rating. The Simple Houseware and ROCDEER listings both describe use with laptops and printers, and the ventilated metal platforms help with laptop airflow. The key check is weight: compare the device against the maker’s stated capacity where one is published, and be cautious with heavy laser printers on stands whose listings give no rating.
Do monitor stands with drawers need assembly?
It varies by design. The gianotter dual riser is listed as requiring no assembly, and bamboo risers like the ROCDEER typically arrive as one finished piece. Metal two-tier stands may need the drawers and pen holders fitted before first use. If assembly matters to you, check the listing’s included components and setup notes before ordering.
Conclusion
A monitor stand with storage drawers earns its place twice: once for the screen height and once for the clutter it removes. Choose the OPNICE two-drawer riser for the most closed storage in a small footprint, the ROCDEER bamboo riser for a furniture-grade look with a drawer and a lower shelf, the gianotter for an affordable way to span two monitors, the Simple Houseware metal riser for a deep ventilated platform with a pull-out drawer, or the meatanty when front USB ports and phone charging matter as much as the drawer itself. Measure your monitor base, confirm the load rating where one is published, and the right pick becomes straightforward.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!